[asemery]

You have finished a paracord project and are not sure what to do with the cord ends. Here are a couple of suggestions. Can be used with any number of strands.

Method 1

First tie a crown knot https://www.google.com/?gws_rd=ssl#q=crown+knot

then a wall knot https://www.google.com/?gws_rd=ssl#q=wall+knot

Bring cord A under the 2 crossing strands a and repeat with the 3 remaining strands.

Tighten. See last step in method 2.

 

[asemery]

Method 2

Method 2
Tie wall and crown knots as described above
Bring the wall knot strand parallel to the crown knot (you are doubling the crown knot here). Repeat with the 3 remaning strands.

With heamostat reach in through center of knot and grab the strand shown and pull strand through knot. Repeat with remaining strands.

Tighten the knot. You can now trim the ends a short distance from the knot and sear them so that they do not fray OR cut the ends flush with the knot and by pushing the ends into the knot and moving the strands around you can make the ends disappear. The same goes true with method 1

 

[MrParacord]

Nice tutorial. Maybe now I can master the wall knot.

 

[Finweaver]

I like the second one realy much